There are many new categories in the smart lock industry, among which the fully automatic smart lock is one of them. Then, what are the differences between the fully automatic smart lock and the general non-automatic smart lock? Below, Xiaobian will simply talk to you.

　　1, the working principle

　　Definition of full-automatic intelligent lock: To understand a product, we need to define the product. We should define a full-automatic lock as a lock product that can automatically open and close the lock after electronic identification processing. A full-automatic lock should include locks with automatic lock body and external motor as automatic opening and closing methods. At present, our automatic locks generally refer to locks with external motors as automatic opening and closing methods.

　　This type of automatic lock works as follows:

　　When the electric signal passes through, the external clutch motor rotates the lock core thumbwheel, so as to realize the original manual operation part of the spring back or the extension of the lock tongue. The principle is very simple, but the work inside is very complicated. First, we must judge the state of the door before we can perform the opening and closing state. Secondly, how to judge the open and closed state of the lock, and finally how to stop it.

　　2, the door opening action is reduced, and the unlocking steps of the traditional hand-held intelligent door lock are as follows:

　　Fingerprint identification-press the handle-open the door-close the door,

　　The opening steps of the fully automatic intelligent lock are as follows:

　　Fingerprint identification-open the door-close the door-lock (some types can be locked automatically)

　　There is one less step to open the door, but the waiting time is increased by about three seconds, mainly waiting for the latch to rebound automatically.

　　3. Advantages and disadvantages

　　Advantages: it reduces the steps of opening the door and is more humanized; The adaptability is higher, only the lock core needs to be adapted; The structure is simpler, and the quality is more stable in theory; There is more room for design, and any shape can be designed;

　　Disadvantages: increased power consumption, although most of them use lithium batteries; The requirements for motors and systems are raised; The requirements for doors are improved; The requirements for electromechanical parts are greatly improved; Cost increase; The volume is large, especially at the indoor end.

　　The above is the difference between fully automatic smart lock and general smart lock introduced by Xiaobian. If you want to know more about smart lock, please pay attention to China Smart Lock Network.