How to set the password and fingerprint of Sakura fingerprint lock? How to add an administrator?

　　Sakura fingerprint lock is a lock with good safety factor, and it is also a widely used fingerprint lock brand for security doors, but many users don’t know much about its setting, so how to set it? This paper introduces how to set the password and fingerprint of Sakura fingerprint lock. Let’s take a look ~

　　How to set password and fingerprint for Sakura fingerprint lock?

　　Wake up the screen to enter the authentication administrator, complete the administrator’s authentication, and listen to the voice prompt to set the password and fingerprint of Sakura fingerprint lock. The fingerprint can be entered by placing your finger on the fingerprint reader. The number needs to be directly entered with an 8-digit password, and press # to confirm.

　　According to the display prompt of the home smart door lock, the new user needs to gently press his finger on the fingerprint collector, and the collecting lamp of the collector flashes to start collecting fingerprints for the first time. When the light of the collector stops flashing, the new user must temporarily remove his finger from the surface of the collector. According to the prompt on the display screen, the new user needs to gently press the same finger on the fingerprint collector again, and confirm it after it is put away. The collecting lamp of the collector flashes again to start collecting fingerprints for the second time. After the login is completed, the display screen prompts the user to "login successfully" or "login failed".

　　How to set the fingerprint of Sakura Smart Lock;

　　1. Smart locks can be accessed not only by passwords, but also by fingerprints. If you want to add fingerprints, you must get the owner’s permission. Generally speaking, there will be three owner’s permissions, and you can add many fingerprints.

　　2. You need to press the "Manage" button to enter the setting interface, enter the information of the administrator, and you will see a prompt to add fingerprints. Select "OK" and enter your fingerprints. This input process may take a little longer, which can ensure that your fingerprints can be entered in all aspects in 360 degrees. Click Save, and then exit.

　　How to set the cherry blossom fingerprint lock? You can refer to the following three instruction manuals of Sakura fingerprint lock:

　　1. Resume initialization

　　As long as we press the initialization button, there will be a voice broadcast: "Initialization succeeded", and all data will be cleared after initialization.

　　Note: Any fingerprint, password and magnetic card can open the door in the initialization state.

　　2. Enter the password to open the door

　　After initialization, press the "Add" key, and after the prompt tone, "Enter the management password and confirm the end"; After entering the management password, enter the door opening password and confirm it; Re-enter the door opening password and press the # key to confirm.

　　3. Set the fingerprint

　　Press the Manage key → Enter administrator information → Add unlocking information → Add fingerprint → OK → Save → Set successfully.

　　If the above methods can’t be solved, you can consult us for remote guidance! We open a 24-hour service hotline and a dedicated service telephone to keep in touch, so that every customer has no worries after sale!