Do you still use traditional door locks at home? That’s really OUT. With the rapid development of science and technology today, intelligent products have been infiltrating into our lives. For smart locks, it can not only bring more convenient ways to open doors, but also be much better than traditional locks in terms of safety protection coefficient. So that in just a few years, smart locks have been accepted by more consumers, and the smart lock industry has entered a stage of fierce competition in a short time.

　　At this stage, in order to find more breakthroughs, we not only pursue exquisite design, but also pay more attention to the improvement of product performance. Take the Chuangmi Xiaobai intelligent door lock G1 as an example, it not only has the functions of conventional fingerprint unlocking, password unlocking, Bluetooth unlocking, one-time password unlocking and anti-prizing alarm, etc. In the structural design of the product, the bulletproof glass panel is added to the outer panel, which makes the safety factor of the product rise to a new level, which is worthy of being an innovative move at a time when the daily chemical industry is becoming more and more serious. So, how strong will it be to use this bulletproof glass as a panel? Let’s unpack and test Chuangmi Xiaobai intelligent door lock G1.

　　Appearance unpacking and details

　　According to the routine steps, let’s unpack the product first.

　　The small white smart door lock G1 is packaged in kraft paper, with the front and rear panels of the product printed on the front, and the product name "Small White Smart Door Lock G1" at the bottom. On the left and right sides of the packaging box, two messages are highlighted: bulletproof glass plate and connected Mijia.

　　Officially open the packaging box, which is filled with anti-collision foam, and all the accessories lie flat in order, so that when unpacking, there will be no messy feeling.

　　The whole product accessories include: front panel, back panel, instruction manual, lock body, accessory package, certificate of approval, opening diagram and 4 5th batteries.

　　For the front and rear panels, there are obvious differences in the structural material selection of the small white smart door lock G1. In order to let everyone see this intuitively, we took a view from the side, and we can see that the surface of the inner panel is not reflective, while the outer panel benefits from the bulletproof glass panel, which will have a particularly strong reflective feeling. Therefore, in terms of gloss, the outer panel is undoubtedly brighter, but there are also shortcomings. The common problem of glass panels is that they are easy to stick to fingerprints.

　　In addition to the difference in the material of the surface panel, the inner and outer panels of the small white smart door lock G1 all adopt the same workmanship, and the periphery of the fuselage is smoothly transitioned, and the handle is also treated with a certain radian, so that both the inner handle and the outer handle can bring a comfortable grip when touched.

　　On the handle of the outer panel, the small white smart door lock G1 integrates fingerprint recognition, which is slightly concave inward. At this time, the cross section formed with the handle has also been smoothed, and the overall look is more exquisite.

　　In addition, from the size of the identification module, compared with some smart locks, the diameter is larger. Combined with the Swedish FPC fingerprint sensor, it can not only realize the rapid identification of 0.3S, but also achieve the unlocking accuracy of 99.3%, and quickly unlock and open the door in one go.

　　The upper part of the outer panel of the small white smart door lock G1 is the display area, which can only be touched when the password is recognized, and the number keys on the display panel can be awakened. At the bottom, there is a doorbell logo, which can be opened by touching it lightly, and the door opening prompt indicator light is located on the left. When the unlocking is successful, a green ring light will appear.

　　In order to avoid the opening on the front of the fuselage of the outer panel, the mechanical keyhole was moved to the bottom of the outer panel, followed by the reset key and the mirco USB charging interface.

　　The handle on the inner panel is provided with a cat’s-eye-proof button, which can avoid the cat’s-eye-proof unlocking; Secondly, if there are children or pets at home, it can also prevent the door from opening by mistake. Under the handle is a manual anti-lock bolt, which requires a relatively large amount of rotation. Therefore, it will be a better design point to deal with the situation that the small black box opens the door reversely.

　　For power supply, the small white smart door lock G1 uses four 5th batteries. Basically, one set of batteries can be used for nearly one year. If the power is low, there will be a power reminder on the mobile phone APP. Even if you encounter some unexpected situations, you can use the emergency charging port of the outer panel to supply power.

　　The overall appearance of the small white smart door lock G1 follows a simple design style, but the details are polished with tools, and the periphery of the fuselage has undergone a smooth transition, and the periphery of the concave fingerprint identification module has also undergone a radian processor. Its unlocking speed can not only reach 0.3S, but also the success rate of unlocking is as high as 98.7%.

　　Explosion proof test

　　In terms of appearance design, we talked about the material selection of the structure. The exterior panel of Xiaobai intelligent door lock G1 is made of bullet-proof glass plate, and its explosion-proof effect is how good it is. The author conducted some knocking tests to see the actual performance.

　　GIF dynamic

　　In the test, the hammer tool is used to knock the outer panel quickly, and the special ratio is the display area at the upper end. After testing, the surface of bullet-proof glass panel is basically not broken and there is no other damage. And the final test panel can still light up, and each touch key is not out of order.

　　It can be seen that in response to a certain impact, the small white smart door lock G1 has stronger impact resistance under the blessing of the explosion-proof glass panel.

　　fix

　　With the formation of the industrial chain, for the installation, all major brands of smart locks are now improving free home installation. Chuangmi is no exception. It can be installed at home 3 hours after the appointment. For many people who are not safe or busy, they can choose the on-site installation service.

　　So whether we install it ourselves or choose to install it at home for free, we must first find out our door parameters before installation. On the premise of determining the feasible installation, it is necessary to measure the thickness of the door, the length and width of the guide plate, and clarify the type of the lock body.

　　In the following installation process, several installation process diagrams were taken immediately.

　　The first step is to determine the direction of the handle, and the master will adjust the position of the handle according to different door opening directions.

　　Step 2, fix the guide plate on the lock body, and then fix it on the door as a whole, with 6 screws up and down for fixing.

　　Step 3: After completing step 2, install the outer panel in sequence. Before installation, it is necessary to use professional cutting tools to properly cut the square steel according to the door thickness. Having said that, I feel that unless I have professional installation tools, I still choose to install it at home, which will save a lot of time.

　　Step 4: Determine the size. Next, pass the connecting wire of the outer panel through the door hole, find the alignment hole and fix the outer panel.

　　Step 5, first fix the bottom plate of the inner panel. Connect the connecting wire and fix the shell of the inner panel. Install the battery and can be debugged.

　　Make sure that there is no abnormal situation during debugging, and carry out APP binding, password setting, fingerprint recording and other operations according to the instructions.

　　Multi-scene unlocking

　　With the infiltration of loT Internet of Things, Chuangmi Xiaobai intelligent door lock G1 has also been successfully connected to Mijia, which makes the use of the APP more worry-free. Just open Mijia APP and select Add Device-Home Security-Door Lock to complete the search for the device, and click Bind.

　　On the main interface of the APP, the functions of Bluetooth unlocking, fingerprint unlocking, password unlocking and temporary password unlocking can be realized, and the unlocking record is recorded at the bottom.

　　GIF dynamic

　　For fingerprint unlocking, in the fingerprint setting interface, you can enter the fingerprint name, and follow the prompts to record the corresponding fingerprint for your family. Judging from the actual test, the finger can be pressed down and the unlocking work can be completed. After 10 repeated fingerprint unlocking tests, the number of unsuccessful identification is 0, which shows that the accuracy of identification is quite satisfactory.

　　Of course, if there are elderly people at home and the fingerprints are particularly worn, it is recommended to use the password to unlock. In order to ensure the security of passwords, the small white smart door lock G1 supports 20-digit false password input. Therefore, even if someone else is on one side, there is no need to worry about the password being leaked.

　　GIF dynamic

　　In addition to the above two kinds of fingerprint unlocking and password unlocking, you can also use Bluetooth to unlock, directly click the unlocking logo on the main interface of the APP, and realize unlocking. If these methods are not adapted, the small white intelligent door lock G1 also provides the traditional mechanical key unlocking. However, in my opinion, once I get used to fingerprint unlocking or password unlocking, mechanical key unlocking is still an alternative unlocking method.

　　The diversification of unlocking methods is only one of the G1 features of Xiaobai smart door lock. In order to further strengthen security protection, a temporary password can also be set on the APP, which is suitable for home economics and friends to visit. Secondly, when the fingerprint or password unlocking fails for five consecutive times, the door lock will give a high-decibel alarm sound, and the program will be locked within 30 seconds, so it is impossible to open the door. On the whole, the small white smart door lock G1 makes it easy to open the door and makes every trip safe and directional.

　　summary

　　After multiple tests, the biggest feeling of using Xiaobai intelligent door lock G1 is that the product safety factor is very high. First of all, in the structural material selection of the outer panel, bulletproof glass plate is used, which has better impact resistance; In terms of functions, it has multiple ways such as fingerprint unlocking, password unlocking, Bluetooth unlocking and mechanical key unlocking. Among them, the recognition speed of fingerprint unlocking reaches 0.3S, and the recognition accuracy reaches 98.7%. And in order to further improve the safety factor, in addition to the cat’s eye-proof design of the inner panel, it also has the methods of anti-theft alarm and 20-digit false password unlocking. On the whole, the small white smart door lock G1 will be very safe for home use.