Smart locks are widely recognized by consumers for their convenience in unlocking and strong security. Many consumers have replaced their traditional locks with smart locks. The following small series will tell you how to replace smart locks with ordinary locks.

　　How to change the intelligent door lock-the method of changing the intelligent lock for ordinary locks

　　1. Underline

　　Mark the height line on both sides of the door and the door frame. Mark the outline of the hole position and the center line of the round hole on the door according to the size shown in the installation mold, and drill the installation holes according to the marked size to start installing the door lock.

　　2, drilling

　　Use electric drill to drill 4 installation holes of 8MM, a wire passing hole with a diameter of 34MM and a square shaft hole with a diameter of 20MM, and use electric drill and wood to cut a concave table with a square hole of 25X50MM and a concave table of 95X30X5MM at the door.

　　3. Install the lock cylinder

　　Check whether each hole position of the lock body is consistent with the installation hole position, press it into the lock core if it is qualified, and then fasten it with screws. After completion, please check the ejection of the lock tongue.

　　4. Install the external lock body

　　Pad the waterproof rubber pad, thread the wire through the perforation and align the positions of the mounting holes. First, use 2 screws to fix the front door body parts on the door through the mounting plate in the door.

　　5. Install the rear lock body

　　Connect the connecting wires of the front and rear lock bodies according to the correct interface, insert the wires into the socket of the lock rear body according to different connectors, then connect the square shaft of the knob, and ensure the reliable connection between the front and rear lock bodies and the lock core. Finally, fix the lock rear body on the door with screws.

　　6. Install the battery and battery cover

　　After loading the battery into the battery box in the correct positive and negative directions, close the battery cover.

　　7, functional testing

　　After installation, refer to the user manual to check whether all relevant functions of the lock are normal.

　　Why are smart locks widely recognized by consumers?

　　The smart lock is different from the previous mode of "opening before scanning". The scanning mode is very simple. Just put your finger on the scanning place and scan it from top to bottom. There is no need to press your finger on the scanning place. The scanning mode reduces fingerprint residue, greatly reduces the possibility of fingerprint copying, and is safe and exclusive.

　　With the improvement of skill innovation, the functional varieties of smart locks are endless. Many products combine the above functions into one, which can be opened by remote control, password, swipe card and fingerprint. Active anti-lock and aggression alarm are also necessary humanized functions, which are more reliable in terms of security. In terms of convenience, it is also more convenient.

　　According to the above, consumers can replace traditional locks with smart locks according to these methods and enjoy more convenient unlocking methods.