We all know that there are many ways to unlock smart locks, but the most important thing is to unlock them with passwords and fingerprints. Today Xiaobian will take you to learn how to set fingerprints and passwords for Haier smart locks. Friends who have started Haier smart locks can follow Xiaobian’s steps to make settings. If you encounter corresponding problems in the use process in the future, I suggest you try to find after-sales help and don’t handle it yourself!
How to set the fingerprint and password of Haier Smart Lock?
1. Wake up the screen, enter the password, hear a beep and the traffic lights flash.
2. Click the finger set to manage fingerprints on the fingerprint collector. If this fingerprint is successfully collected, it will ring and the indicator light will blink alternately from the traffic light to the green light.
3. Continue to press the fingerprint, and every time you press it, a short "beep" will be issued.
4. If the entry is successful, a long beep will be issued. If it fails, it will sound twice.
The above is a general modification method. For details, please consult after sales: 400-8388-875.
Tips: Never lock the door when operating by yourself, so as to avoid setting mistakes; Can’t open the door! It is recommended to find professional customer service and master to guide the operation!
How to modify the password of Haier smart lock
1. Enter the management mode
2. Select "User Management" to confirm, then "Delete User" and then "Delete Password" to confirm.
3. At this time, you can choose two different operation modes to achieve two different purposes of deleting the password:
Select "Delete Number" to confirm, then enter the 4-digit number to be deleted (if the number you entered at that time was 8, then enter 0008 here, and replace the number with 0 before it is less than 4 digits), and then press the [#] key; (2, 8, 4 and 6 can move the cursor up and down, left and right respectively.
Select "Group Delete" and confirm, then you can choose to delete all user passwords or all management passwords, stop the cursor on the corresponding options and confirm.
How to add Haier smart lock?
1. Select "User Management" for confirmation, then "Add User" for confirmation, and then "Add Fingerprint" for confirmation.
2. Set a four-digit number and then confirm.
3. Put the fingerprint you want to add on the fingerprint head, verify it three times repeatedly, and the system will prompt "Add successfully".
How to restore the factory settings of Haier smart door lock 1. Remove the battery cover of Haier smart door lock and press and hold the [reset button] as shown in the figure for three seconds.
2. Go outside, enter the administrator menu, find System Management, and it will show whether to initialize, click Yes, and then confirm (2.8.4.6 corresponds to up, down, left and right).
3. When the system displays [Initialization Successful], it means that the factory settings have been restored successfully!
If you have other difficult questions, you can also consult the after-sales service: 400-8388-875.
Note: due to the increase in maintenance, the hotline is easy to be busy; Please dial more times; Please forgive me! All-weather and all-day service for you.
The above is the related content that Xiaobian brings to you about how to set the fingerprint and password of Haihai smart lock, hoping to help everyone! For more information, please pay attention to China Smart Lock Network.