How does the blog smart lock enter the administrator mode? The conventional method is to enter the * sign first, and then enter the password to successfully enter the management mode! Or enter the fingerprint code and enter the administrator mode through the administrator fingerprint. If you have other difficult questions, please consult us in detail, and a professional master will provide you with remote guidance! For specific questions, please call our after-sales service center directly: 400-8388-875!

　　How does the blog smart lock enter administrator mode?

　　If you are not an administrator, you need to be in your room to change the administrator. This requires the function of "restoring factory settings". Under the battery on the back panel of BOK smart lock, some batteries need to be removed to see it. Press the reset button for a long time, and it will display on the front panel whether it is necessary to restore the factory settings, and then operate it on the panel. After restoring the factory settings, re-enter the fingerprint again, and you can reset the administrator’s permissions.

　　What is the initial password of Bok Smart Lock?

　　This depends on the Bok smart lock manual, and there should be this initial password on this cover. Of course, it’s ok to try it yourself. After all, the initial password setting is very simple, and it is guaranteed that there will be no big problem if you try it less than three times a day. Because different types of Bok fingerprint locks have different initial passwords, some are 6 zeros or 6 eights, but there are also a few.

　　How to record fingerprints with Bok smart lock?

　　1. First, connect the fingerprint identification device with the BOK smart lock to read the registered fingerprint;

　　2. Install the fingerprint identification device and BOK smart lock on the door frame, and connect the fingerprint identification device to the power supply;

　　3. Put your finger on the fingerprint identification sensor and input fingerprint information;

　　4. Connect the entered fingerprint data with other authentication data to complete the entry;

　　5. Finally, using the BOK smart lock, when the fingerprints match, the door will open automatically.

　　If you want to delete the user’s fingerprint: press "3", press "1" for single deletion, please enter the fingerprint or number. If the number ends with #, the fingerprint will be displayed after successful deletion. Please press "2" to delete all, and the deletion will be successful.

　　Modify the door opening mode: press "4", press "1" for normal mode, and press "2" for safe mode.

　　Modify the management password: please press "5", please enter the management password ending with #, and enter the management password again to modify it successfully. The password of Kaidishi fingerprint lock is 6 digits. First, touch the wake-up area, light the key indicator, enter the password and add # to finish.

　　The above information is all the answers about how the blog smart lock enters the administrator mode! Now many families will use fingerprint locks, because everyone’s fingerprints are fixed, which means that our ID numbers are not duplicated, and the safety factor of this lock will be higher. When buying fingerprint locks, you must buy genuine products through formal channels. Now there are many fake and shoddy products on the market, and the quality of such products cannot be guaranteed.