Nowadays, people’s awareness of anti-theft has gradually increased, and naturally more attention is paid to the choice of I lock. There are many types of door locks on the market now, especially smart locks are becoming more and more popular. This kind of lock can be unlocked by fingerprint or password, but some owners can’t use it, so there will be such a question: How can the smart lock of Sakura delete fingerprints? How to change the password of Sakura Smart Lock? The following small series will take you one.

　　Get up and read the article!

　　How to delete fingerprints in Sakura Smart Lock

　　1. Add an administrator

　　First of all, an administrator should be added to the smart lock, and the administrator of a lock can add and delete the fingerprints of any user on the lock. Of course, a smart lock is not limited to one administrator, but can be used in multiple places. Specific operation: press the menu key of the smart lock and click "Add Administrator". At this time, you will be prompted to press your finger and operate step by step until the fingerprint is recorded.

　　2. Add user fingerprints

　　Adding a user’s fingerprint to a smart lock means adding the fingerprint of a user who has used the smart lock for a long time. Its operation method is similar to adding an administrator, but first you must verify that the administrator can. Specific operation: enter the menu, verify the fingerprint of the administrator, click "Add User", and finally enter. It should be noted that when the smart lock enters the fingerprint, just put your finger away.

　　If the deletion fails, you can also consult the telephone number for guidance and modification: 400-8388-875. No matter what you need, just call our maintenance service number and be at your service at any time.

　　How to change the password of Sakura Smart Lock Smart Lock

　　1. Enter the management interface of smart lock.

　　2. Select "Modify Password";

　　3. Changing the password requires the administrator’s authority, and the smart lock needs to enter the password to enter the administrator’s authority.

　　4. Confirm the original password, and continue to set a new password according to the voice prompt to end with the confirm key;

　　5. If you want to continue other operations, return to the management mode interface and make corresponding choices; If you don’t want to continue the operation, wait for 15 seconds and exit automatically.

　　It should be noted that the password of smart lock is usually 6-12 digits, so don’t set it too simply. Moreover, it is not difficult to modify the password of the smart lock, usually according to the steps in the manual.

　　If you can’t contact the brand after-sales service you are looking for or the problem has not been solved, please consult the after-sales service: 400-8388-875.

　　Friendly reminder: there are many maintenance orders in the smart lock after-sales service center; The line is sometimes busy; Please call more times; I hope everyone will understand!

　　How to install cherry blossom smart lock

　　1, draw the hole line

　　Draw lines on the front, back and side of the door according to the opening diagram provided by the factory. (See the specific drawings for the specific opening diagram). Draw the hole line on the front and back of the door: determine the installation height of the door lock, and the height of the handle is 90CM away from the bottom of the door. (If the old door is modified, the door will still prevail.) Draw the hole line according to the hole drawing. Draw the opening line of the door side: first draw the center of the door side, and draw the opening line of the door side according to the punching. Draw the opening line of the door frame: after the lock core is installed, open the opening line of the door frame according to the corresponding position of the lock core (according to the requirements of the opening diagram). Pay attention to the height of the corresponding lock core when opening the door frame.

　　2, open the door hole

　　First, open the front face and the back face according to the drawn opening line. It is necessary to pay attention to prevent wood fibers from producing flash when opening holes (it is best to cut the fibers along the opening line with a knife first) to prevent the opening from being too large. Then open the door hole of the door frame according to the drawn opening line. Note: the hole size of the door frame is required to be high, so as to prevent the door lock from shaking due to the virtual position.

　　3. Lock the door

　　After opening the packing box, first check whether the door lock parts are complete and the direction is consistent with the room, and then test whether the computer lock core and circuit board work normally with the battery, and then start to install the door lock. Install the lock core into the door panel, with the connector inserted into the inner side panel, and all the fixing holes meet the requirements.

　　4, mechanical lock head

　　Install the mechanical lock head into the lock core and fix it with screws, and check whether the mechanical key can open the door. When installing the front and rear lock bodies, adjust the idling four-corner rotating sleeve of the lock core to the correct position (the square shaft and spring are marked in the inner hole of the four-corner rotating sleeve), and install the front lock body on the door panel.

　　Sakura smart lock is a kind of smart lock with human fingerprint as the identification carrier and means. It is the perfect crystallization of computer information technology, electronic technology, mechanical technology and modern hardware technology. The above is all the knowledge about how to delete the fingerprint and how to change the password of the smart lock of Sakura. I hope I can help you.