Laiwu Lock Collection: Installation Instructions of Glass Door Lock and Matters Needing Attention in Installation of Glass Door Lock!

　　The use of glass door locks in home life is also relatively common, and now many storefronts have begun to use glass door locks. As long as there are doors, there will be locks, and glass locks have always been the focus of people’s attention. Many people buy glass locks, but they don’t know how to install them when installing them. Next, I will introduce you to the installation method of glass door lock. What problems should be paid attention to when installing glass door locks?

　　What is the installation method of glass door lock?

　　1. Drill the lock body installation hole according to the lock body installation dimension diagram. Install the lock body into the hole position in turn, align the rear fixing screw, install the screw and connecting screw on the outer panel part, insert the interlocking square bar into the square bar hole of the lock body, and align the square hole of the outer panel part with the interlocking square bar hole to install the outer panel part. Install the inner panel components and align the rear fastening screws; Insert the lock body into the lock hole of the lock body from the inside out; Insert the screw from the lock body panel hole and align it with the thread of the lock body mounting hole, and then tighten it. Then install the lock box or lock plate on the door frame.

　　2. After initial installation, rotate the outer handle and the inner handle to observe whether the oblique tongue can be smoothly retracted and extended; Turn the knob on the rear panel to feel whether the square tongue is smoothly retracted; Insert the key and rotate it back and forth to feel whether the square tongue extends smoothly and retracts.

　　3. After fastening the assembly screws, repeat the above actions and try several times. If the actions are not smooth, loosen the screws, adjust the position and try again until it is appropriate.

　　What problems should be paid attention to when installing glass door locks?

　　1. There are the installation essentials of aluminum alloy (or other materials) enclosed glass doors. The glass doors can usually accept EM1000 series magnetic door locks if they are embedded, no matter whether your doors are open internally or externally or double-open. The main points of placement are the same as the embedded placement of ordinary doors. Precautions for placement: the glass door must be equipped with aluminum alloy wrapping frame, and the lock suction and spacing are required to be less than 6 mm, so the spacing from the door edge to the door frame is required to be less than 6 mm, and the ground spring should be accepted with stable character, otherwise it will affect the positioning of the lock.

　　2. Installation essentials of frameless glass doors. Usually, locks are difficult to be installed on glass doors. Even though some locks can be installed, it will affect the elegance of the whole door. Our electromagnetic locks can be easily installed, and they are beautiful and relatively firm.

　　3. Place the magnetic lock on the frameless glass door with a U-shaped bracket: the glass door without a frame must have accessories to help with the installation. The main points of placement are basically similar to those of ordinary doors, except for the time difference in the third step of placement of the iron plate. Put the U-shaped groove, rubber cushion and stainless steel gasket (on one side of the locking screw) on the glass door, lock it on the glass door with the headless hexagon socket head screw, and then firmly fix the relay plate on the U-shaped groove. For different glass door thicknesses and different types of electromagnetic locks, we provide different types of placement parts: UBG brackets.

　　4. Apply AB frame to install and place. First, fasten the AB frame with special glass adhesive (or double-sided tape) on the glass door, and then fasten the iron plate on the bracket. If the home is being renovated or if it is being renovated, the master who locks the door will help install it, and it is not necessary to do it himself. If the lock is broken, you need to change it yourself.

　　The installation method of the glass door lock is actually similar to that of the ordinary door lock. If you buy a glass door lock, you will have an installation manual. You can install it according to the method mentioned in the manual, and there are pictures to see, so it will not be difficult to install.