Do you find that more and more people are installing smart locks around? Do you think it’s convenient to open the door just by "beep" every time? If you also consider installing a smart lock, don’t miss the next content. Because smart locks are not easy to install on all doors.
Xiao An teaches you 10 seconds to judge whether your door can be equipped with a smart lock!
Step 1 look at the security door
Xiao An, the brand of security door, gives you a category here. Evergrande, Vanke and Sunac, which are big developers, are customized for security doors, regardless of the brand, and all need to be modified, so the master can modify them directly.
Others look at the upper left or upper right corner inside or outside the door, with brands. Buyang, Wan Jia, Qunsheng, Xinduo, Rishang, Hejiali, these first-and second-line engineering brands are all universal.
Wang Li is self-contained. You can install Wang Li’s locks directly, and other brands usually need major modification.
Panpan, Xingyue, a system, uses the lock of Baode ‘an, hehe, it is a matter of modification. The early installation changes greatly, and the middle and late installation changes little or no change.
Foreign brands must be modified, which is a matter of the size of the modification.
2. Look at the panel size
This is the simplest, not as complicated as the brand, and it doesn’t need to be measured. (PS: What are you measuring? Measurement is only a matter of modification or not, and it is not a matter of solving the problem of installation.)
Just look at the big panel or the small panel.
Because if the panel is big, it is easy to install the fingerprint lock, which is too ugly. As long as it is not the following type of lock, it is basically a problem of modification, and there is no problem of hole exposure unless you use the smart locks of sticks.
3. Look at the hook of heaven and earth
The hook of heaven and earth is actually very simple. Just look at whether there are lock holes on the top and bottom of your door frame. There will also be lock holes on the upper and lower sides of the door with the hook of heaven and earth. In fact, the hook of heaven and earth is not recommended for everyone to install, and it is not necessary.
Because the installation of the heaven and earth hook will burden the lock body, and the heaven and earth hook may get stuck in the later stage.
So … . . . . .
Step 4 look at the lock body
You can’t see the lock body basically, just look at the guide piece, which is the metal plate with keyhole on the side of the door.
Also, it depends on whether the lock body is long and flat (lock tongue) or round (lock tongue), and how many tongues there are (ordinary or overlord).
Just remember the following three!
The first one is to see whether the guide vane is square or round;
The second one depends on what shape the lock tongue is: square, flat or round;
The third one just needs to see how many locking tongues there are.
Step 5 measure
Usually, the old master knows what lock body to install at a glance, but it’s better to measure it. Measure what? Just measure the length and width of the guide vane.
You can look directly at the picture above.
6. What about the special ones?
Anything different from the above four items,
Remember, remember, remember.
It’s basically a big change.
This depends on the master’s craftsmanship. In some special cases, it is even necessary to remove the door and cut it to successfully install the smart lock. Let’s experience this for ourselves.
Finally, in any case, you must communicate well before buying the smart lock to ensure that the smart lock can be installed smoothly.
Anjia Intelligent Lock has joined hands with the largest intelligent lock installation company in China to provide customers with the most comprehensive and perfect after-sales guarantee. At present, the service scope of the company covers 99% of the administrative regions in China, serving 318 cities and regions, and has 50,000 lock installers to provide customers with professional and standardized services.