What if the drawer lock won’t open? Ji ‘nan Laiwu Niuquan Town and Miaoshan Town Kaisuo Automobile Unlocking Company

　　First, what should I do if the drawer lock can’t be opened?

　　If the key of the drawer lock is dropped and the drawer lock can’t be opened, what should I do? In fact, it’s very simple to open the drawer lock, just buy a professional lock to unlock it.

　　The method and principle of unlocking a marble drawer lock are basically the same as those of a common concealed lock. When the key is pierced, it turns to the right and to the left. Note that when the drawer lock is opened by unlocking things and methods, when the push rod rotates 180 degrees clockwise, the marbles on the outer seat of the lock core will bounce into the groove below the lock hole in the lock core due to the effect of the tension spring. At this time, it is necessary to reach into the keyhole with a single hook, jack up the marbles, and push the lock core against the clockwise direction with the push rod. The upper marble turns into the groove of the lock core and blocks the lock core, so that the lock core cannot rotate. Jack up the marble with a single hook, and rotate the lock cylinder with a push rod.

　　Second, how to open the drawer lock

　　1. Opening mode of the open lock of the drawer lock

　　In the drawer, there are two ways to lock the drawer, one is the open lock, and the other is the hidden lock. So how to pry open the open lock of the drawer? There are some tips. For open locks, there will be a lock nose installed in the drawer, and all you need to do is open the lock nose. Also, you can cut the lock with pliers, and you can open the drawer smoothly.

　　2. Opening mode of hidden lock of drawer lock

　　There is also a hidden lock for drawer locks. Nowadays, drawer locks in many families are hidden locks. For hidden locks, opening is more complicated. The inner core of each hidden lock is composed of several parts, so if you want to pry it open, you need to knock off the middle part with a hammer and so on, and then open it.

　　Third, how to open the drawer lock quickly

　　1. Before use, the dust/oil/moisture on the paste must be wiped off to keep the veneer clean.

　　2. Peel off the release paper on the adhesive tape.

　　3. Paste the product (in the locked state) where it is confirmed that it needs to be installed.

　　4. When opening, you can open it with a hard button.