Hanhu fingerprint lock can be unlocked not only by fingerprints, but also by keys, cards and passwords. However, both fingerprint unlocking and password unlocking need to be added first. Today, Xiaobian wants to talk to you about how to add fingerprints and passwords to Hanhu fingerprint locks. If you don’t know it now, come and have a look!

　　How to add fingerprints to Hanhu fingerprint lock

　　First, enter the management mode

　　Step 1: Enter "00" and confirm.

　　Step 2: Enter the password of the administrator, or directly place the fingerprint lock of the administrator on the fingerprint lock recognizer.

　　Step 3: At this time, you can page up and down according to your actual needs, select the function you want to operate, and then enter user management.

　　If the modification fails, and it will not be operated, please call 400-8388-875.

　　Second, set the administrator fingerprint

　　Step 1: Enter the management mode.

　　Step 2: Select "User Management", then enter and select "Add Administrator".

　　Step 3: Put the fingerprint you want to add on the fingerprint reader, and then follow the instructions of the fingerprint lock. After the fingerprint is successfully recorded, enter a number or use the system default number, and then confirm, and you’re done! (Up to three management fingerprints)

　　Third, set the user fingerprint

　　Step 1: Enter the management mode.

　　Step 2: Select User Management, then enter and select Add User.

　　Step 3: Put the fingerprint of the user you want to add on the fingerprint reader according to the prompt of the fingerprint lock, enter a four-digit number after adding successfully, and confirm again. (Up to 200 sets of user fingerprints)

　　How to add password to Hanhu fingerprint lock

　　First, add the administrator password

　　Step 1: Enter the management password setting interface.

　　Step 2: Enter a 6-10 digit management password, then confirm it, then enter the management password again and confirm it again.

　　Step 3: Enter the number you want to set or select the default number, and then confirm (set up three groups of management passwords at most).

　　Second, add the user password

　　Step 1: Enter the management mode.

　　Step 2: Select "Add User" to enter the user password setting interface.

　　Step 3: Enter a 6-10 digit user password, then press the entity key and enter it again for confirmation. This completes the addition of the user password. (Up to 10 groups of password users)

　　The above is a general modification method. For details, please consult after sales: 400-8388-875.

　　Tips: Never lock the door when operating by yourself, so as to avoid setting mistakes; Can’t open the door! It is recommended to find professional customer service and master to guide the operation!

　　The above is about how to add fingerprints and passwords to Hanhu fingerprint lock. It should be noted that when adding fingerprints and passwords, you can listen to the relevant prompt voice of fingerprint lock and do not press the keys blindly.